Best Airbrush Accessories: 8 Master Airbrush Add-Ons Worth Having

Best starter accessory bundleMaster Airbrush Essential Accessories KitBest regulator and water trapMaster Airbrush Heavy Duty Diaphragm Mini Pressure Regulator with Gauge andBest airbrush hoseMaster Airbrush Super Premium 10 Foot Nylon Braided Airbrush HoseBest cleaning stationMaster Airbrush 3-in-1 Cleaning Pot with Holder

The best airbrush accessories fix the small problems that spoil a paint job: water spitting from the nozzle, a hose that kinks, paint drying in the tip, or nowhere safe to set the gun down. None of them is glamorous, but each one is simple insurance for your airbrush.

This list covers eight Master Airbrush add-ons and what their listings say they do. If you are still choosing the airbrush itself, see our best gravity feed airbrush guide first.

Our picks

1

Best starter accessory bundle

Master Airbrush Essential Accessories Kit

This kit puts five common add-ons in one box: a 6 ft braided hose, a mini inline filter and water trap, a quick disconnect coupler, an airflow adjustment coupler and a 3-way splitter manifold with plugs. The listing says every piece uses standard 1/8 inch fittings. The splitter lets one compressor feed up to three airbrushes.

Best forNew airbrushers who want hose, moisture control and quick changes in one order

Skip it ifYour compressor or airbrush uses 1/4 inch fittings

Pros

• Five parts in one kit
• All standard 1/8 inch fittings
• Splitter supports up to three airbrushes

Cons

• Inline filter is smaller than a full water trap

Check price →

2

Best regulator and water trap

Master Airbrush Heavy Duty Diaphragm Mini Pressure Regulator with Gauge and

The TFR-3000 is a true diaphragm mini regulator with a gauge and a built-in water trap. The maker says it controls operating pressure up to 100 PSI and catches condensation before it reaches the airbrush. A transparent bowl shows collected water, and a quick-release drain valve empties it without tools. The listing also claims reduced pulsation.

Best forCompressors without a regulator, or humid workshops

Skip it ifYour compressor already has a regulator and trap built in

Pros

• Gauge for repeatable pressure
• Clear bowl and quick drain
• Diaphragm design to steady airflow

Cons

• Needs a mounting spot near the compressor

Check price →

3

Best airbrush hose

Master Airbrush Super Premium 10 Foot Nylon Braided Airbrush Hose

This 10 ft hose has premium silicone inner tubing under a tightly woven nylon cover. The listing calls it kink and tear resistant and says it fits Iwata, DeVilbiss and Master Airbrush, among other brands. Both ends are 1/8 inch BSP female, so it works with standard airbrushes and compressors.

Best forReplacing a stiff stock hose

Skip it ifYou need more than 10 ft of reach

Pros

• Soft silicone inner tube
• Kink and tear resistant
• 1/8 inch BSP on both ends

Cons

• Longer than you need at a small desk

Check price →

4

Best cleaning station

Master Airbrush 3-in-1 Cleaning Pot with Holder

The TP-50 cleaning pot lets you blow cleaner through the airbrush into a closed pot instead of into the room. It doubles as an airbrush holder, and the lid works as a color palette and water cap. The listing says four replacement filters are included.

Best forColor changes and end-of-session flushing

Skip it ifYou only spray outdoors

Pros

• Contains cleaning overspray
• Holds the airbrush between uses
• Four spare filters included

Cons

• Filters need changing over time

Check price →

5

Best cleaning kit

Master Airbrush - Airbrush Cleaning Kit - Spray Gun & Airbrush Clean Set

The ACK-1 kit has 25 pieces for airbrushes and spray guns: 13 micro needle sizes, a 5-piece mini brush set, a mini end brush with holder, a double-sided dental pick, two tube brushes, a combination brush, a large brush and a 16 oz bottom-feed cleaning bottle.

Best forDeep cleaning after a long session or a clog

Skip it ifYou only need a few small brushes

Pros

• 13 micro needle sizes
• Covers airbrush and spray gun parts
• Includes a cleaning bottle

Cons

• More pieces than a casual user needs

Check price →

6

Best airbrush holder

Master Airbrush 4-Airbrush Holder Station - Swivel & Tilt Tabletop

The HD-130 holds four airbrushes on a base with four rubber suction cups. The base rotates 360 degrees, and the lower two holders swivel on their own. The listing says it accommodates virtually any airbrush brand.

Best forArtists who switch between two to four airbrushes

Skip it ifYou want air manifold ports built into the stand

Pros

• Holds four airbrushes
• Suction cups resist tipping
• 360-degree rotation

Cons

• Suction cups need a smooth surface

Check price →

7

Best repair kit

Master Airbrush 18 Piece Airbrush Repair & Parts Kit

This major repair kit has 18 parts and, per the listing, fits only Master Airbrush models G22, G23, G24, G25, G26, G34 and G39. A 13-piece minor kit for the same models is also listed. Keeping spares on hand means a bent needle or worn seal does not end the project.

Best forG22-family owners who airbrush often

Skip it ifYou own a G45, G76, S68 or another model not on the list

Pros

• 18 replacement parts
• Model list is clearly stated
• Smaller 13-piece version available

Cons

• Fits only seven listed models

Check price →

8

Best spare paint jars

Master Airbrush Pack of 10

This pack has ten empty 3/4 oz (22 cc) glass jars with plastic screw lids. The listing says the industry-standard thread fits most plastic-topped siphon feed lid assemblies that take 3/4 oz jars. Each jar is about 2 inches tall and 1.4 inches across.

Best forSiphon feed users who pre-mix colors

Skip it ifYou only use gravity cups

Pros

• Ten jars per pack
• Seal and store mixed paint
• Standard 3/4 oz thread

Cons

• Lid assembly not included

Check price →

How we picked the best airbrush accessories

We grouped the Master Airbrush catalog by the job each part does: air delivery, moisture control, holding, cleaning, repair and paint storage. In each group we chose the listing with the clearest specs and the widest fit.

• Fittings stated: every pick names its thread size.
• Fit stated: repair parts list the exact models they fit.
• No overlap: one pick per job, with alternatives below.

We did not use ratings or review counts. Specs come from the listings only.

Which airbrush hose length and fitting do you need?

Master Airbrush lists hoses from 6 to 25 feet. Most use 1/8 inch BSP on both ends, but one does not.

The 6 ft TH-021 has one 1/4 inch end, which the listing flags as non-standard. Pick it only if your compressor outlet is 1/4 inch.

Master Airbrush Premium 10 Foot Recoiling Airbrush Hose

Check price →

Master Airbrush Premium 25 Foot Nylon Braided Airbrush Hose

Check price →

Master Airbrush Premium 6 Foot Nylon Braided Airbrush Hose

Check price →

Fittings, couplers and manifolds

Small brass parts make a setup faster to use. Each one does a single job:

• Quick disconnect (TF-117): 1/8 inch BSP male and female; air shuts off when you unplug the airbrush.
• Inline mini filter (TF-12): a 5-micron filter that screws onto the airbrush, with a spring-loaded release valve.
• 3-way splitter (TF-13): one female inlet, three male outlets, plugs for unused ports. Unmetered.
• Metered manifold (TF-4): 1/4 inch BSP inlet with 1/8 inch outlets and individual valves; includes a 1/4 to 1/8 inch adapter.
• Holder with manifold (TH-40): one inlet, six hose ports and two extra cradles, for up to eight airbrushes.

Master Airbrush Quick Release Disconnect Coupling with Plug

Check price →

Master Airbrush In-Line Mini Air Filter Water Trap - 1/8" BSP Threads

Check price →

Master Airbrush 6 Station Airbrush Holder with Air Manifold

Check price →

Browse every part on the hoses and fittings page.

What to look for in airbrush accessories

1. Match the thread. Most airbrushes and hoses here use 1/8 inch BSP. A 1/4 inch part needs an adapter.
2. Fix moisture first. Water in the line causes spitting and spots. A regulator with trap, or at least an inline filter, comes before any upgrade.
3. Plan for cleaning. A cleaning pot handles daily flushing; a brush and needle kit handles clogs.
4. Count your airbrushes. One gun needs a quick disconnect. Two or more call for a holder and a splitter or manifold.
5. Check repair fit. Repair kits list exact model numbers.

Our TC-320 vs TC-326T comparison shows what two popular compressors include.

Small extras that help

The 11-piece SG-209 set adds five 3.5 inch brushes (2 to 5 mm) and five cleaning needles on a key ring. The ED-100 pack gives you 100 eyedroppers marked at 0.5, 1.0, 1.5 and 2.0 ml, handy for measuring paint and reducer.

Master Airbrush 11 Piece Airbrush Cleaning Kit

Check price →

Master Airbrush 100 Pipette Eyedroppers for Liquid Transfer

Check price →

Master Airbrush 13-Piece Minor Airbrush Repair Kit

Check price →

For full setups, see airbrush kits, air compressors and cleaning and accessories, or our best airbrush compressor list. Miniature painters should read best airbrush for miniatures.

FAQ