Master Airbrush · 10 products
Master Airbrush Hoses & Fittings
Hoses and fittings are the parts that sit between the air compressor and the airbrush. Ten items make up the line: four airbrush hoses, a brass coupling, two manifolds, a pressure regulator, an in-line water trap and an accessories kit that bundles the basics. The line suits a first air line, a hose that has worn out, or a bench that is growing from one airbrush to several.
Start from the job the part has to do. Reach comes down to hose length and whether the hose coils back on itself, while more than one airbrush calls for a coupling or a manifold. Before ordering, check the two 1/4" ends in the line, on the 6 foot hose and the metered manifold inlet.
Every hose and fitting in the line
Each card below is one part, with its length, outlets or filter noted so it can be placed in the air line.
Master Airbrush 6 Foot Nylon Braided Airbrush Hose
Braided air hose for connecting airbrush tools that take a 1/4" fitting.
- 6 foot length
- Nylon braided construction
- 1/8" BSP female fitting
- 1/4" BSP female fitting
- Black hose
Master Airbrush Essential Accessories Kit
Hose, water trap, couplers and splitter kit for building an airbrush air line.
- 6 ft braided airbrush hose
- Standard 1/8" fittings throughout
- Mini inline air filter and water trap
- Quick disconnect and airflow adjustment couplers
- 3-way splitter manifold with plugs
Master Airbrush 10 Foot Recoiling Airbrush Hose
Coiled 10-foot airbrush hose that retracts to keep the workspace tidy.
- Extends to 10 feet
- Self-coiling recoil design
- 1/8" fittings on both ends
- Color: Black
- Part number TH-022
Master Airbrush 25 Foot Nylon Braided Airbrush Hose
Long braided airbrush hose with matching 1/8" fittings at each end.
- 25 foot length
- Nylon braided construction
- 1/8" BSP female fittings on both ends
- Kink and tangle resistant
- Black hose
Master Airbrush 10 Foot Braided Airbrush Hose
Nylon braided airbrush hose with silicone tubing for connecting compressors and airbrushes.
- Length: 10 feet
- 1/8" BSP female on both ends
- Silicone internal tubing
- Tightly woven nylon braided cover
- Kink and tear resistant
- Color: Blue
Master Airbrush Quick Release Disconnect Coupling
Brass coupling for switching airbrushes quickly on a single air hose.
- 1/8" BSP male and female fittings
- Coupling with matching plug
- Color: Brass
- Automatic air shut-off on disconnect
- Part number TF-117
Master Airbrush 3-Way Air Hose Splitter Manifold
Splitter manifold that runs up to three airbrushes from one air hose.
- 3 male air outlets
- 1 female air inlet
- 1/8" BSP fittings
- Fitting plugs for unused outlets
- Unmetered, no per-outlet control
- Color: Black
Master Airbrush 4-Way Metered Airbrush Manifold
Metered manifold for setting air pressure separately for each connected airbrush.
- 1/4" BSP female inlet
- Four 1/8" BSP male outlets
- Control valve knob per outlet
- Includes 1/4" to 1/8" BSP inlet adapter
- Color: Silver
Master Airbrush Mini Pressure Regulator with Water Trap
Diaphragm regulator with gauge and water trap for moisture-free airbrush air.
- Operating pressure up to 100 PSI
- True diaphragm design
- Pressure gauge
- Built-in water trap filter
- Quick-release drain valve
- Transparent collection chamber
Master Airbrush In-Line Mini Air Filter Water Trap
Mini water trap that mounts on the airbrush to keep moisture out.
- 5-micron filter
- Spring-loaded moisture release valve
- 1/8" BSP female thread for airbrush
- 1/8" BSP male thread for hose
- Pistol-grip shape, mounts on airbrush
- Part number TF-12
How to choose Master Airbrush air line parts
Hose length against the distance to the compressor
Measure from the compressor outlet to where the airbrush is held. The 10 foot blue braided hose covers a typical bench and serves as a replacement hose on a Master Airbrush setup. The 25 foot hose is kink and tangle resistant, for a compressor kept in another corner of a garage or studio. A 6 foot run leaves the least hose on a compact bench.
Braided or self-coiling
The TH-022 recoiling hose extends to 10 feet and pulls back into a coil when released, so it suits small workspaces where hose clutter gets in the way. Its reach stops at 10 feet. For the same 10 feet without the coil, the blue braided hose is the alternative.
Swapping airbrushes or running them together
The TF-117 quick release coupling serves one artist switching between airbrushes on a single supply hose: the plug stays on each airbrush, and the air closes off when the coupling comes apart. Two or three airbrushes running at the same time need a manifold instead, and the options below cover that choice.
Which option fits your setup
6 ft hose with a 1/4" end
Choose it for an airbrush setup with 1/4" fittings. One end is a 1/4" BSP female fitting and the other a 1/8" BSP female fitting, and the black nylon braided hose gives 6 feet of reach and maneuverability. A setup with 1/8" on both sides is better served by the 10 or 25 foot hoses.
Check price on Amazon25 ft hose for long runs
Choose the 25 foot length when the compressor cannot sit next to the bench. Both ends are 1/8" BSP female, and the braided cover resists kinking and tangling across the floor.
Check price on Amazon4-way metered manifold
Choose it when each airbrush on a shared compressor should be pre-set to its own pressure. A control valve knob sits on each of the four 1/8" BSP male outlets, and the 1/4" BSP inlet comes with a 1/4" to 1/8" BSP inlet adapter. For two or three airbrushes at a single pressure, the unmetered 3-way splitter is the simpler part.
Check price on AmazonIn-line mini water trap
Choose the TF-12 when moisture from the air compressor still shows up in the spray. Its pistol-grip body mounts on the airbrush, with a 1/8" BSP female thread for the airbrush and a 1/8" BSP male thread for the hose. Fittings other than 1/8" BSP need an adapter.
Check price on AmazonMaster Airbrush hoses and fittings compared
Thread size, length or outlets, and the job each part does in the air line.
| Master Airbrush | Part type | Fittings and features | Length or outlets | Use it for | Check price on Amazon |
|---|---|---|---|---|---|
| 6 Foot Nylon Braided Hose | Braided hose | 1/8" BSP F and 1/4" BSP F | 6 ft | Airbrushes with a 1/4" inlet | Check price on Amazon |
| 10 Foot Recoiling Hose | Self-coiling hose | 1/8" both ends | Extends to 10 ft | Small, cluttered workspaces | Check price on Amazon |
| 10 Foot Braided Hose (Blue) | Braided hose, silicone tube | 1/8" BSP F both ends | 10 ft | Replacing a worn hose | Check price on Amazon |
| 25 Foot Nylon Braided Hose | Braided hose | 1/8" BSP F both ends | 25 ft | Compressor far from the bench | Check price on Amazon |
| Quick Release Disconnect Coupling | Brass coupling and plug | 1/8" BSP M and F | 1 connection | Swapping airbrushes on one hose | Check price on Amazon |
| 3-Way Splitter Manifold | Unmetered splitter | 1/8" BSP | 1 inlet, 3 outlets | Two or three airbrushes at one pressure | Check price on Amazon |
| 4-Way Metered Manifold | Metered manifold | 1/4" inlet, 1/8" outlets | 1 inlet, 4 outlets | Separate pressure per airbrush | Check price on Amazon |
| Mini Regulator with Water Trap | Diaphragm regulator | Gauge, quick-release drain | Up to 100 PSI | Setting pressure and draining moisture | Check price on Amazon |
| In-Line Mini Water Trap TF-12 | Airbrush-mounted filter | 1/8" BSP F and M | 5-micron filter | Moisture at the airbrush | Check price on Amazon |
| Essential Accessories Kit | Hose and fittings kit | 1/8" throughout | 6 ft hose, 3-way splitter | Completing a new air line | Check price on Amazon |
Questions about airbrush hoses and fittings
Does the 3-way splitter need all three outlets in use?
What comes in the Essential Accessories Kit?
Do these hoses work with airbrushes from other brands?
How do you tell when the regulator's water trap needs emptying?
Build your airbrush setup the right way
Kits, gravity and siphon feed airbrushes, Cool Runner compressors, hoses and cleaning gear. Check the specs and today’s price on Amazon.