Master Airbrush · 10 products
Master Airbrush Air Compressors for Airbrushing and Light Air Tools
This page covers the compressor on its own, the unit that sits beside the bench and feeds air to the airbrush. Ten models make up the line, from the black C16-B that runs off a 110V AC adapter to the TC-626 workshop model that also drives nail guns and sanders. Cake decorators, nail artists and model painters sit at the small end; studios with spray guns and several stations sit at the top.
Count what will draw air at the same moment before comparing models. A single airbrush needs a fraction of what a sander or a station of three does, and the gap shows in liters per minute: 18 on the TC-77 against 85 on the TC-626. Noise climbs with output too, so check where the compressor will actually run.
All ten compressors in the line
Each card below is one compressor, with its airflow and the hose and holders it ships with.
Master Airbrush Cool Runner II TC-326T Air Compressor
Dual-fan 1/5 HP air compressor with a 3-liter storage tank for airbrush work.
- 1/5 HP single-piston motor
- 3 liter air storage tank
- 0.8 CFM, 25 liters per minute airflow
- Oil-less, 47 dB operation
- Auto off at 57 psi, on at 43 psi
- Hose and holder for 2 airbrushes
Master Airbrush C16-B Mini Air Compressor
Small black air compressor that runs an airbrush from a standard wall outlet.
- Mini 12V DC compressor
- 110V AC plug-in adapter
- 6-foot braided air hose
- Hose ends: 1/8 inch
- Color: black
Master Airbrush TC-320 Cool Runner II Compressor
Quiet, oil-less dual-fan air compressor with a carrying handle for portable airbrush work.
- 1/5 HP single-piston, 2 cooling fans
- 0.8 CFM, 25 liters per minute
- Pressure range 0 to 57 PSI
- Diaphragm regulator with gauge and water trap
- Oil-less, 47 dB
- Holder for 2 airbrushes
Master Airbrush TC-40 Cool Runner Compressor
Fan-cooled single-piston air compressor that supplies air on demand for longer airbrush sessions.
- 1/6 HP single-piston compressor
- Built-in cooling fan
- Air pressure regulator with gauge
- Water trap filter
- 6-foot braided hose with 1/8 inch ends
- Automatic shutoff when not in use
Master Airbrush Cool Runner TC-420 Air Compressor
Compact dual-fan 1/5 HP airbrush compressor with regulator, water trap and braided hose.
- 1/5 HP single-piston, oil-less
- 25 liters/minute, 0.85 CFM
- 47 dB operation
- Auto off at 65 psi, on at 51 psi
- Operating temperature about 100°F
- 6-foot braided hose, holders for 2 airbrushes
Master Airbrush Cool-Runner TC-426 Tank Compressor
Turquoise 1/5 HP dual-fan compressor with a 3-liter tank for steady airbrush pressure.
- 3 liter air storage tank
- 1/5 HP single-piston, oil-less
- 25 liters/minute, 0.85 CFM
- 47 dB operation
- Auto off at 65 psi, on at 51 psi
- Color: Turquoise
Master Airbrush TC-600 3/5 HP Air Compressor
3/5 HP tank compressor with enough airflow to run three airbrushes.
- 3/5 HP piston motor
- 4 liter air storage tank
- 48 liters/minute, 1.7 CFM
- Oil-less, 69 dB operation
- Double-gear switch, up to 116 psi
- 10-foot braided hose, holder for 3 airbrushes
Master Airbrush TC-626 1 HP Tank Air Compressor
Dual-piston 1 HP compressor with a 9-liter tank for air tools and airbrushes.
- 1 HP dual-piston, oil-less
- 9 liter air storage tank
- 3 CFM, 85 liters/minute
- Operating quietly at 70 dB
- Auto off at 116 psi, on at 87 psi
- 10-foot hose rated to 300 psi
Master Airbrush TC-77 Compressor with Small Tank
Portable, quiet air compressor with a small tank for steady air pressure at the airbrush.
- 1/8 HP portable airbrush compressor
- Airflow: 18 liters per minute
- 47 dB
- Regulator with gauge and mini in-line moisture filter
- 6-foot braided air hose
- Built-in handle and airbrush holder
Master Airbrush TC-96T Twin-Piston Compressor
Studio air compressor with a 1.5 gallon tank for steady pressure across two airbrushes.
- 1/4 HP twin-piston compressor
- 1.5 gallon air storage tank
- Airflow: 40 liters per minute (1.4 CFM)
- Regulator with gauge and water trap filter
- 6-foot braided air hose
- Built-in cooling fans
What to weigh before buying an air compressor
How loud the room can be
Output and noise rise together. The TC-77, TC-320 and the Cool Runner tank models work at 47 dB, which suits work areas where low noise matters. The TC-600 reaches 69 dB in exchange for 1.7 CFM, and the TC-626 70 dB for 3 CFM. A shared living space points to the 47 dB group, while a garage or workshop can take the louder pair.
The pressure the job calls for
The TC-320 covers a pressure range of 0 to 57 PSI through its diaphragm regulator with gauge, a span aimed at airbrush work. Spray guns and nail guns ask for more: the TC-600 has a double-gear switch up to 116 psi, and the TC-626 cycles between 87 and 116 psi with a 10-foot hose built for 300 psi. Check the working pressure of any air tool against these figures first.
Moving it and plugging it in
The C16-B is a mini 12V DC compressor with a 110V AC plug-in adapter, so it runs from a household outlet and packs small with its 6-foot braided air hose. The TC-77 has a built-in handle and airbrush holder for hobbyists who move their setup between rooms, and the TC-320 and TC-420 carry handles as well.
Which Master Airbrush TC model fits the work you do
Cakes, nails or temporary tattoos
The TC-77 delivers 18 liters per minute at 47 dB, with a regulator with gauge and a mini in-line moisture filter on board. Pick it if the airbrush is for cake decorating, nail art, model painting or temporary tattoo work.
Check price on AmazonLong sessions on a lighter motor
The TC-40 is a 1/6 HP single-piston compressor with a built-in cooling fan and automatic shutoff when not in use. Pick it for long sessions on a setup that holds two airbrushes, as long as the airbrush takes 1/8 inch hose ends.
Check price on AmazonDual fans, no tank, easy to carry
The TC-420 gives 0.85 CFM from an oil-less single-piston motor and comes with a 6-foot braided hose and holders for 2 airbrushes. Pick it for extended sessions that move between workspaces by the carry handle.
Check price on AmazonAir tools alongside the airbrush
The TC-626 moves 85 liters per minute through a dual-piston motor and a 9 liter air storage tank. Pick it for a workshop that runs nail guns, sanders and spray guns as well as airbrush stations.
Check price on AmazonHow each Master Airbrush compressor fits a setup
Airflow, pressure, supplied hose and intended work for all ten models.
| Master Airbrush | Airflow | Pressure | Hose supplied | Suited to | Check price on Amazon |
|---|---|---|---|---|---|
| C16-B Mini Air Compressor | - | - | 6 ft braided, 1/8 in ends | Compact setups on a 110V AC outlet | Check price on Amazon |
| TC-77 Compressor with Small Tank | 18 L/min | Regulator with gauge | 6 ft braided | Cake decorating, nail art, model painting | Check price on Amazon |
| TC-40 Cool Runner Compressor | - | Regulator with gauge, auto shutoff | 6 ft braided, 1/8 in ends | Long sessions, two airbrushes | Check price on Amazon |
| TC-320 Cool Runner II Compressor | 0.8 CFM | 0 to 57 PSI | - | Quiet home or studio, moving between workspaces | Check price on Amazon |
| Cool Runner II TC-326T Air Compressor | 0.8 CFM | Off at 57 psi, on at 43 psi | Hose included | Long continuous sessions, low noise | Check price on Amazon |
| Cool Runner TC-420 Air Compressor | 0.85 CFM | Off at 65 psi, on at 51 psi | 6 ft braided | Extended sessions, carry handle | Check price on Amazon |
| Cool-Runner TC-426 Tank Compressor | 0.85 CFM | Off at 65 psi, on at 51 psi | - | Constant pressure without pulsation | Check price on Amazon |
| TC-96T Twin-Piston Compressor | 1.4 CFM | Regulator with gauge | 6 ft braided | Studios, low-CFM air tools, spray guns | Check price on Amazon |
| TC-600 Air Compressor | 1.7 CFM | Up to 116 psi | 10 ft braided | Up to 3 airbrushes, spray guns, nail guns | Check price on Amazon |
| TC-626 1 HP Tank Air Compressor | 3 CFM | Off at 116 psi, on at 87 psi | 10 ft, 300 psi hose | Nail guns, sanders, spray guns | Check price on Amazon |
Air compressor questions before you order
Which compressors come with an air hose?
How many airbrushes can rest on the compressor?
How do the TC-320 and TC-420 differ from their tank versions?
What does the TC-96T add over the single-piston models?
Build your airbrush setup the right way
Kits, gravity and siphon feed airbrushes, Cool Runner compressors, hoses and cleaning gear. Check the specs and today’s price on Amazon.